
DMX-IT 512
Great for simple dimming and fixture switching
Input: N/A
Output: 1x 5-Pin DMX
Faders: 12
Includes: Power Adapter
Optional Accessories: 12v Battery, Internal AA

DMX-IT 524
Great for simple dimming and fixture switching, has internal battery
Input: N/A
Output: 1x 5-Pin DMX
Faders: 24 with 2 Program
Includes: Power Adapter
Optional Accessories: 12v Battery

Luminair with iPad Pro
Prosumer Virtual Lighting Console
Input: N/A
Output: Requires ODE or AKS
Faders: 1 Universe, configurable setups per fixture
Includes: iPad, Luminair

RatPac AKS Plus
ARTNET DMX Node to Transmit DMX signal to any CRMX Receiver; Pair with Luminair
Input: Wireless/iPad
Output: CRMX Signal
Includes: Charging Cable, Antennas
Optional Accessories: Cintenna RX
What?: This thing creates your DMX universe and talks to your controller, which is usually an iPad with Luminair. If you need a portion of your system to be wired, connect a Cintenna RX to the male end of a DMX cable, or an opto splitter.

RatPac Cintenna TX
Transmit DMX signal to any CRMX Receiver
Input: 5-Pin DMX
Output: CRMX Signal
Includes: Charging Cable, Antenna
Optional Accessories: Cintenna RX | DMX-It | Other DMX Boards
What?: Hook this up to any DMX board to transmit its output. Patch it into an opto-splitter to make only a portion of your system wireless. Connect it to a Cintenna RX or anything that has a CRMX receiver.

RatPac Cintenna RX
Receive any CRMX Signal. Battery Powered
Input: CRMX Signal
Output: 5-Pin DMX
Includes: Charging Cable, Antenna
Optional Accessories: Cintenna TX | AKS
What?: Patch this into any fixture that does not already have a CRMX receiver. Patch it into an opto-Splitter to break away from your wired system.

RatPac 12 x 200w
Dim 12 Channels of Low Wattage Lamps
Input: CRMX Signal, DMX + 120v
Output: 5-Pin DMX
Includes: PowerCon Cable, Antenna
Optional Accessories: Cintenna TX | AKS
What?: Wireless or wired control of LED tubes or small practicals. 12 channels, 200 watts per channel.

Leprecon ULD 360
Dim 6 channels over 2 20a circuits
Input: CRMX Signal, DMX + 2x 120v
Output: 5-Pin DMX
Includes: Antenna
Optional Accessories: Cintenna TX | AKS
What?: Control 6 channels in dim or switch mode @ 600 watts per channel. Confirm wireless capability of individual units.

RatPac 6 x 2.4k & 12 x 1.2k
Dim 6 high-wattage fixtures or 12 low-wattage fixtures
Input: CRMX Signal, DMX + 1x 100a Bates
Output: Edison or Socapex
Includes: Antenna
Optional Accessories: Cintenna TX | AKS
What?: Breaks 100 amps of 120v into 6 or 12 channels. Dim/non-dim capable.